How to Use

Sarthi Ultra White Wall Putty

Preparation of Sarthi Ultra White Wall Putty Paste

  • Take necessary quantity of Sarthi Ultra White Wall Putty in a pan of 32-38% water by volume is required to prepare paste of better consistency and smoothness.
  • Mix half of necessary water quantity. Mix the Putty & wait for minimum five minutes.
  • Mix remaining quantity of water to get desired consistency and smoothness.
  • Mix staying power for 10-15 minutes to avoid lump and get uniform paste.
  • Mix the Sarthi Ultra White Wall Putty during preparation of paste for use of 02 Hours.
  • You may again make the paste with the same procedure, which gives best quality results.
  • Mixing can be done manually or by using a suitable and available mixer.

Application of Sarthi Ultra White Wall Putty

  • Please ensure that surface should be totally clean.
  • Please ensure that surface plastered or made with cementations material.
  • The surface should be in just wet condition.
  • Apply first coat of Sarthi Ultra White Wall Putty with using a blade on the wall with a "Bottom to Up" configuration for proper stickiness.
  • Apply second coat of Sarthi Ultra White Wall Putty (Preferably after 5 hours in summers and after 14 hours in winters). Second coat shall be applied "Horizontally".
  • Allow complete drying for 3-4 days and if find any application marks then use Emery Paper to clean.